User guide
®
Bluetooth Keyboard
BKB10
Basics
Overview
1
2
3
4
5
NFC detection area
Battery notification light
Bluetooth® notification light
Power switch
Charging port
Keypad overview
Email
Select all
Select text to the left of the cursor
Select text to the right of the cursor
Copy
Cut
Paste
Go to the previous audio or video file
Play/Pause
Go to the next audio or video file
Stop
Decrease the volume
Increase the volume
Lock
Pair your keyboard with another device
3
This is an Internet version of this publication. © Print only for private use.
Home
Search
Menu
Browser
Bluetooth® notification light status
Flashing rapidly
Flashing slowly
No light
The keyboard is searching for previously connected devices to pair with.
Pairing mode—the keyboard is available for pairing with other devices.
The keyboard is paired with a device or is in idle mode.
When several devices are available for pairing, the keyboard tries to pair with the most
recently connected device.
Battery notification light status
Red light
Battery is charging.
Flashing slowly
No light
Battery level is below 15 percent.
Charging is complete or no charger is plugged in.
Charging the keyboard
To charge the keyboard
Charge the keyboard for 4 hours before using it for the first time. Use a regular charger only.
1
2
3
Plug the charger for your Android phone or tablet into a power outlet.
Plug one end of the USB cable into the charger.
Plug the other end of the USB cable into the charging port on your keyboard.
A micro USB cable and charger are not included at purchase.
4
This is an Internet version of this publication. © Print only for private use.
Turning on the keyboard
To turn on the keyboard
•
Slide the power switch downwards.
5
This is an Internet version of this publication. © Print only for private use.
Setting up the keyboard
Your keyboard uses Bluetooth® technology to communicate with your Android
device. To establish a connection between the two devices, you can either use
automatic NFC-assisted pairing or your can pair the devices manually.
To automatically pair the keyboard with an Android™ device using NFC
1
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
3
Keyboard: Turn on your keyboard.
Place the Android™ device over the NFC detection area of your keyboard so
that the NFC detection area of each device touches the other. The devices
should now connect to each other automatically.
The NFC function is unavailable when the keyboard is supplied power via a USB cable.
To manually pair the keyboard with an Android™ device using Bluetooth®
1
2
Keyboard: Make sure the charger is disconnected from the keyboard.
Keyboard: Turn on the keyboard. The keyboard enters pairing mode
automatically and the Bluetooth® notification light flashes rapidly.
Android™ device: Turn on the Bluetooth® function, then search for and
3
connect to the keyboard.
If the Bluetooth® notification light stops flashing before you get time to pair your mobile device
with the keyboard, hold down the Pair key until the Bluetooth® notification light flashes and
then try again.
6
This is an Internet version of this publication. © Print only for private use.
Support on the web
device, including downloads, troubleshooting tips and a User guide.
7
This is an Internet version of this publication. © Print only for private use.
Legal information
Sony BKB10
Prior to use, please read the Important information leaflet separately provided.
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment, may be made by Sony Mobile
Communications AB at any time and without notice. Such changes will, however, be incorporated into new
editions of this User guide.
All rights reserved.
©2014 Sony Mobile Communications AB.
Interoperability and compatibility among Bluetooth® devices varies. Device generally supports products
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the
Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All
rights reserved.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of
their respective owners.
All illustrations are for illustration only and may not accurately depict the actual accessory.
8
This is an Internet version of this publication. © Print only for private use.
Declaration of Conformity
We, Sony Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony type RD-0100
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards EN 300 328:V1.8.1, EN 301 489-17:V2.2.1,
EN 301 489-3:V1.6.1 and EN 60 950-1:2006 +A11:2009 +A1:2010 +A12:2011
following the provisions of, Radio Equipment and Telecommunication Terminal
Equipment directive 1999/5/EC.
Lund, January 2014
Pär Thuresson,
Quality Officer, SVP, Quality & Customer Services
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
9
This is an Internet version of this publication. © Print only for private use.
|